Glove Ports
Glove Port Assembly
The glove port assembly consists of an inner securing ring on the inside of a perspex viewing panel. The glove port is fastened to the inner securing ring with screws and two gaskets, and has two grooves to take the beaded end of a glove.
The bung assembly is adjustable for seal tension controlled by a centre knob. For safety, the bung may be locked in position to prevent it being sucked into the box. Available in 150, 200, 250 and 300mm diameters.
MIP can supply a range of glove ports and accessories to fit our own bespoke, and industry standard glove boxes.
Circular glove ports
Circular Glove Port
192mm Dimensions: Flange dia: 236.6mm with 12 x 7mm holes on 219mm PCD. Snout dia: 203mm. Bore dia: 192mm 4/14700.
Circular Glove Port Gasket
Material: Neoprene150mm Dimensions: 203.2mm O/D 155.6mm I/D with 8xmm holes on 179.4mm PCD 44/14375
192mm Dimensions:244.5mm O/D x 193.7mm I/D with 12 x 7mm holes on 219mm PCD 44/14725.
Inner Securing Ring
Material: Phenolic resin150mm Dimensions: 203.2mm O/D x 152.4mm I/D with 8 x M6 inserts on 179.4mm PCD 44/14400
192mm Dimensions: 244.5mm O/D x 192mm I/D with 12 x M6 inserts on 219mm PCD 44/14725.
Glove Port Bung Assembly
Material: Phenolic resin150mm Dimensions: Flange dia: 162mm. Boss dia: 140mm 44/14425.
192mm Dimensions: Flange dia: 200mm. Boss dia: 191.3mm 44/14775.
Oval glove port 150mm x 250mm (Internal assembly)
Completed 150mm x 250mm internal assembly
Recommended fixing screws M5 by 20mm pan head for a 6mm thick window
Oval glove port 150mm x 250mm
Material – Black Acetal with 12 M5 brass threaded inserts Dimensions - Internal bore 150mm x 250mm x 60mm deep external flange 198mm x 298mm
We can also make oval ports from a variety of other plastics including polyurethane resin, please contact us for prices
See 3D model of 150 x 250 oval portOval port pressure ring 150mm x 250mm
Dimensions – 198mm x 298mm x 5mm with 12 fixing holes
Oval port gasket 150mm x 250mm
Dimensions – 198mm x 298mm x 2mm with 12 fixing holes
Oval glove port 150mm x 250mm (external assembly)
Completed 150mm x 250mm external assembly
This oval assembly can be fitted to a maximum window thickness of 12 mm. If the window of the application that these ports are to be fitted to is thicker then the external oval assembly would be requiredRecommended fixing screws M5 by 20mm pan head for a 6mm thick window
Oval glove port 150mm x 250mm
Material – Black Acetal with 12 M5 brass threaded inserts Dimensions - Internal bore 150mm x 250mm x 60mm deep external flange 198mm x 298mm
Oval glove port inner securing ring 150mm x 250mm
Dimensions - Internal bore 144mm x 244mm x 12mm
Oval glove port gasket 150mm x 250mm
Dimensions - Internal bore 144mm x 244mm x 2mm with 12 fixing holes
Oval glove port 200mm x 400mm (external assembly)
Completed 200mm x 400mm external assembly
Oval glove port 200mm x 400mm
Material – Black Acetal with 20 M6 brass threaded inserts Dimensions -Internal bore 200mm x 400mm x 44mm external dimensions 255mm x 455mm
We can also make oval ports from a variety of other plastics including polyurethane resin, please contact us for prices
Oval port pressure ring 200mm x 400mm
Dimensions -Internal 200mm x 400mm x 5mm thick with 20 drilled fixing holes
Oval glove port gasket 200mm x 400mm
Dimensions - Internal 200mm x 400mm x 3mm thick with 20 fixing holes external dimensions 255mm x 455mm
Extended ports
Glove Port extended
Material: Phenolic resinDimensions:150mm (6"). Flange dia: 197mm with 8 x 7mm holes on 179.4mm PCD. Snout dia: 163.5mm Bore dia:152.4mm Length:73mm extended to 73mm or 97mm