Glove Ports
The glove port assembly consists of an inner securing ring on the inside of a perspex viewing panel. The glove port is fastened to the inner securing ring with screws and two gaskets, and has two grooves to take the beaded end of a glove. The bung assembly is adjustable for seal tension controlled by a centre knob. For safety, the bung may be locked in position to prevent it being sucked into the box. Available in 150, 200, 250 and 300mm diameters.
MIP can supply a range of glove ports and accessories to fit our own bespoke, and industry standard glove boxes.
(You can click on most of the images below to see a larger version if required)
Circular Glove Ports
Glove Port and Bung Assembly
| Glove Port 150mm (6") I/D | |
| Glove Port 150mm (6") white | |
| Gasket, 150mm (6") (Glove Port) | |
| Inner Securing Ring 150mm (6") | |
| Bung Assembly 150mm (6") | |
| 'O' Ring 150mm (6") (spare for bung) | |
| Securing 'O' Ring | |
| Tapered sleeve 150mm to 100mm (6" to 4") | |
| Fixing Screws, plated | |
| Fixing Screws, stainless steel | |
| Locking tabs for Inner securing Ring | |
| Rubber washer (seloc) | |
| l2mm (1/2") Metal washer | |
| Cuff Ring | |
| Cuff 'O' Ring | |
| Glove Port 6" (as per 44/14350) extended to 73mm long |
Circular Glove Port Assembly
150mm (6") Glove Port (44/14350)
Material: Cotton filled phenolic resin.
Dimensions: Flange dia: 197mm with 8 x 7mm holes on 179.4mm PCD. Snout dia: 163.5mm. Bore dia: 152.4mm. Length:38mm
150mm (6") Glove Port Gasket
(44/14375)
Material: Neoprene. Dimensions: 203.2mm, 155.6mm I/D with 8 x 7mm holes on 179.4mm PCD.
150mm (6") Glove Port Inner Securing Ring (44/14400)
Material: Cotton filled phenolic resin.
Dimensions: 203.2mm O/D x 152.4mm I/D with 8 x M6 inserts on 179.4mm PCD
150mm (6") Glove Port Bung Assembly (44/14425)
Material: Cotton filled phenolic resin.
Dimensions: Flange dia: 162mm. Boss dia: 140mm.
6" Glove Port extended to 73mm
Oval Glove Ports
Oval Glove Port 200mm x 400mm Assembly
| 250mm x 150mm Oval Glove Port | |
| 250mm x 150mm Pressure Ring | |
| 250mm x 150mm Gasket | |
| Fixing Set M5 | |
| Retaining 'O' Ring | |
| 250mm x 150mm Oval Port External | |
| 250mm x 150mm Inner Securing Ring | |
| 250mm x 150mm Gasket | |
| Oval Port 200mm x 400mm | |
| Oval Gasket 200mm x 400mm | |
| Oval Pressure Ring 200mm x 400mm | |
| Retaining 'O' Ring 200mm x 400mm | |
| Fixing Set M6 |
Section through Oval Glove Port
150mm x 250mm Assembly
(click on image to see larger view)
Oval Glove Port Assembly
Oval Glove Port (150mm x 250mm)
Oval Gasket
Oval Pressure Ring
Oval Glove Port (200mm x 400mm)
Oval Pressure Ring
Oval Glove Port Gasket
(200mm x 400mm)
Posting / Transfer Ports
| 44/14700 | Transfer Port 192mm 7 9/16" I/D |
| 44/14725 | Gasket 192mm 7 9/16" I/D |
| 44/14750 | Inner Securing Ring 192mm (7 9/16" I/D) |
| 44/14775 | Bung Assembly 192mm (7 9/16") I/D |
| 44/14777 | 'O' Ring 192mm (7 9/16) (spare for bung) |
| 23/50443 | 'O' Ring Securing |
| 44/15605 | Tubular Post Port 192mm I/D) x 460mm long |
| 44/15600 | Tubular Post Port 192mm I/D x 230mm long |
| Tapered sleeve 192 to 100mm (7 9/16" to 4") | |
| Posting Port 250mm I/D | |
| Inner Securing Ring 250mm | |
| Gasket 250mm | |
| Bung 250mm | |
| 'O' Ring 250mm | |
| Posting Port 305mm (12") I/D | |
| Inner Securing Ring 305mm (12") | |
| Gasket 305mm (12") | |
| Bung 305mm (12") | |
| 'O' Ring 305mm (12") | |
| Tapered sleeve 305-l00mm (12"-4") | |
| Port 457mm (18") | |
| Ring 457mm (18") | |
| Gasket 457mm (18") | |
| Posting Port 533mm (21") | |
| Inner Securing Ring 533mm (21") | |
| Gasket 533mm (21") | |
Posting / Transfer Port Assembly
192mm (8") Transfer Port Assemblies (44/14700)
Material: Cotton filled phenolic resin.
Dimensions: Flange dia: 236.6mm with 12 x 7mm holes on 219mm PCD. Snout dia: 203mm. Bore dia: 192mm.
192mm (8") Transfer Port Gasket (44/14725)
Material: Neoprene.
Dimensions: 244.5mm O/D x 193.7mm I/D with 12 x 7mm holes on 219mm PCD.
192mm (8") Transfer Port Inner Securing Ring (44/14750)
Material: Cotton filled phenolic resin.
Dimensions: 244.5mm O/D x 192mm I/D with 12 x M6 inserts on 219mm PCD.
192mm (8") Transfer Port Bung Assembly (44/14775)
Material: Cotton filled phenolic resin.
Dimensions: Flange dia: 200mm. Boss dia: 191.3mm.
View the MIP Price List (PDF file - 106Kb).
(You will need Acrobat Reader to view this PDF file. If you do not have Adobe Acrobat Reader, click here to download the reader first.)
